Tiled bathroom sink and basket

How to use Polycell Sealant Strip

1. Ensure every surface is clean, dry and free from loose particles. Use Polycell Mould Remover if needed.

2. Strip away all traces of old sealant with Polycell Sealant Remover and allow to dry.

3. For surfaces which flex, such as baths, fill with water to usual depth before fixing sealing strip. Take care to avoid wetting surface.

4. Cut the Polycell Sealant Strip to the required length using scissors.

5. Fold in half along the length with the adhesive facing outwards.

6. Remove a small section of the backing tape.

7. Push the small section of exposed adhesive strip firmly into pre-pared area. Gradually remove the backing tape whilst carefully applying remaining length of the sealant strip.

8. To finish, press firmly along length of the sealant strip.

Fetching the data, please wait...