How to use Polycell Moisture Resistant Polyfilla

1. Ensure the surface and crack you’re working on are dry and free from loose material.

2. Work the tube well between fingers to loosen the filler.

3. Remove the cap and carefully cut the top from the nozzle with a sharp knife.

4. Squeeze the filler in a continuous bead, then level off with a wet knife or damp cloth, angling the bead to shed water.

5. Wipe off excess filler before it dries.

6. Protect from water until it is fully dry.

7. Once you’ve finished using Polycell Moisture Resistant Polyfilla, pop the cap back on and wash your tools in warm water.