How to fill a gap between your wall and coving or skirting

1. Ensure the surface and crack you’re working on are dry and free from loose material.

2. Remove the tip of the Polycell Flexible Gap Polyfilla cartridge carefully with a sharp knife, and screw nozzle on.

3. Remove the cap and carefully cut the top from the nozzle with a sharp knife to the hole size you require.

4. Place cartridge into a skeleton gun and seat the plunger by pressing the trigger.

5. Squeeze the trigger to force out the filler and move the gun along the repair.

6. The filler may be smoothed with a wet rounded spatula or dowl.

7. Wipe off excess before it dries.

8. You can paint over Polycell Flexible Gap Polyfilla as soon as it’s dry. 

9. Replace the cap and wash tools in warm water.

10. You can use Polycell Flexible Gap Polyfilla to fill holes and gaps of up to 20mm wide by 12mm deep.