- What should I do to prepare a wall for painting or wallpapering?
- How do you disguise where a picture rail used to be?
- Can you tell me how much water I need to mix the wallpaper paste?
- How do you make repairs when you start to peel off old wallpaper and it takes off the plaster surface as well?
- Can Smoothover be used on ceilings?
How to use Squeeze and Seal Kitchen and Bathroom

- Difficulty level stars difficultylevel
Step by step
- Difficulty level stars difficultylevel
BEFORE USE; Ensure surfaces are clean and free from loose material or mould. Remove old sealant residue completely before applying the new sealant – use Polycell Sealant Remover if necessary.
- 1
Work tube well between fingers.
- 2
Carefully cut nozzle to the required bead width (max 6mm) using a sharp knife. Cut the tube seal and attach nozzle.
- 3
HOW TO USE; Squeeze tube between fingers and palm of hand, and apply sealant directly into the gap as a continuous, single bead.
- 4
Smooth lightly with a wet round ended tool, angling the bead to shed water.
- 5
Remove excess sealant with a damp cloth before it dries.
- 6
After use, fit cap to the end of the nozzle to prevent product drying out.
- 7
Wash tools with warm water.
- 8
Questions?
Call us0333 222 7171(on working days between 08:15 and 16:45)