FAQ
How to use Polycell Plug and Fix Polyfilla
- Difficulty level stars difficultylevel
Print
Step by step
- Difficulty level stars difficultylevel
Ensure the hole is clean, dry, and free from dust, oil and grease.
- 1
Remove product through the perforated backing card (always store unused product in the original packaging).
- 2
Cut a length of strip sufficient for the hole to be filled.
- 3
Remove the protective film from both sides of the cut strip.
- 4
Wearing suitable gloves, knead the strip until a uniform colour is obtained. Slight wetting with water improves workability.
- 5
Push product into hole until it is fully filled. A flat blade tool can be used for this. Remains workable for up to 4 minutes.
- 6
Remove excess material and ensure flush with the hole.
- 7
Centrally insert screw 1/2 way using light finger pressure to create a pilot hole. Leave screws in place to set for 1 hour.
- 8
Using a screwdriver carefully remove screw, position the fixture (e.g. bracket or shelf) and then fully tighten screw until flush with fixture (do not overtighten). Always follow manufacturers instructions for the fixture.
- 9
Do not use product for hanging objects over 20kg.
- 10
Questions?
Call us0333 222 7171(on working days between 08:15 and 16:45)
