How to use Polycell Paste the Wall

  • Difficulty level stars difficultylevel

Step by step

  • Difficulty level stars difficultylevel

Measure out quantity of cold water (7 pints/4 litres to one sachet). You’ll get a perfectly smooth paste if you sprinkle sachet contents into the water whilst stirring briskly for 1 minute, after 3 minutes stir again. Leave to stand for 30 minutes and stir again, the paste is now ready to use.


Apply the paste generously in an even layer onto the wall using a pasting brush or roller. Only paste enough wall area to hang one length of wallpaper at a time. Ensure the pasted area is slightly wider than the wallpaper.


Take care to keep the decorative side of the wallpaper free of paste. Wipe off excess adhesive immediately using a clean, damp cloth or sponge.



Call us0333 222 7171
(on working days between 08:15 and 16:45)

Find your nearest Polycell stockist:

You can find Polycell products in many supermarkets, major DIY stores and smaller independent stores throughout the UK. The range they stock may vary, so it's a good idea to check product availability with them in advance to avoid disappointment.

Contact Polycell UK
0333 222 7171
9.00 - 17.00