Polycell Mould Remover
Ideal for mould prone areas, for a long lasting paint finish
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Removes mould
-
Ideal for mould prone areas.
-
For a long lasting paint finish.
-
Coverage This 0.5 L bottle will clean 2.5 m2 ( at 200mls/m2).
-
Drying Time 2 - 4 hours
-
Recoatable Overnight (for painting)
-
Composition Water-based
-
Easy use
-
MOULD & ALGAE PROTECTED PAINT FILM
Product Description
Polycell Mould Remover contains a powerful fungicide which removes mould. Ideal for preparing mould prone areas before painting to give a better paint finish.
Application Description
"HOW TO USE: 1. Twist trigger nozzle to ‘on’ position and spray onto surface wetting thoroughly
but avoiding runs into other areas. 2. Wipe over using a cloth or sponge to remove
the mould. Surface is ready for repainting once dry. 3. If mould is growing through a
layer of paint or paper, strip back to bare wall/wood and treat with two applications. "
but avoiding runs into other areas. 2. Wipe over using a cloth or sponge to remove
the mould. Surface is ready for repainting once dry. 3. If mould is growing through a
layer of paint or paper, strip back to bare wall/wood and treat with two applications. "
Technical & Safety Documentation
Tips & Advice
-
1. Preparing the Surfaces"BEFORE USE: Use where mould exists or on clean surfaces. Do not dilute. Always
wear safety glasses, protective gloves and a suitable face mask." -
2. CleaningAFTER USE- Twist trigger nozzle to ‘off’ position. Do not use or store in extremes of temperature and protect from frost.
-
3. StoringDo not use or store in extremes of temperature and protect from frost
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.