Polycell Polyfilla SmoothOver Tool Set
Specially designed for use with Polyfilla Smoothover to give a perfectly smooth finish that's ready to paint
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Specially designed for use with Polyfilla Smoothover to give a perfectly smooth finish that's ready to paint
-
Simply roll on ……….& smooth off
-
Drying Time NA
-
Recoatable NA
-
Easy use
Product Description
The Polyfilla SmoothOver Tool Set has been specially designed for use with Polyfilla SmoothOver making it easy to achieve a perfectly smooth finish that's ready for painting.
The SmoothOver Roller is made from a special foam making it easy to load and giving an even coverage of Polyfilla SmoothOver. The SmoothOver Smoothing Wiper has a comfortable, soft grip handle and easy glide flexible edge designed to 'smooth' the surface without leaving tramlines.
The SmoothOver Roller is made from a special foam making it easy to load and giving an even coverage of Polyfilla SmoothOver. The SmoothOver Smoothing Wiper has a comfortable, soft grip handle and easy glide flexible edge designed to 'smooth' the surface without leaving tramlines.
Application Description
HOW TO USE : 1) Stir the product well to a creamy consistency. 2) Immerse the Smoothover Roller fully into the Polyfilla Smoothover covering the roller in product. 3) Gently roll the product out onto the wall, covering an area of 1m². Smooth off using the SmoothOver Wiper in an arc over the surface of the product, ensuring that all texture is fully covered. 4) Continue across the wall 1m² at a time, overlapping each section to ensure an even coverage. 5) Apply a second coat if needed. When surface is fully dry, lightly sand down small irregularities and tramlines for a perfectly smooth finish. 6) Your walls are now ready to decorate, don't worry if your background colour shows through, this will be covered when you decorate.
Tips & Advice
-
1. Preparing the SurfacesBEFORE YOU START : Fully read instructions for use on the Polyfilla SmoothOver product (sold separately) prior to use. First scrape off any high peaks from the textured surface with a pallet knife or sandpaper. Do not use the SmoothOver Smoothing Wiper to scrape rough or textured surfaces. This can damage the smoothing edge.
-
2. CleaningAFTER USE - Remove excess product from tools before washing with warm water.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.