Polycell One Coat Stain Stop
Covers most types of stains & prevents them from reappearing
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Dries in 2 to 3 hours (depending on conditions)
-
For plastic, concrete, stone, masonry, plasterboard & wood
-
Use indoors
-
Covers pen, grease marks, nicotine & soot
-
For a long lasting paint finish
-
Drying Time Dries in 2 to 3 hours (depending on conditions)
-
Recoatable 12 hours
-
SUPERIOR HIDING POWER
Product Description
Polycell Stain Stop has been specially formulated to cover grease marks, pen, nicotine, crayons, rust, soot and dry water stains on walls and ceilings in just one coat, preventing them from showing through and spoiling decorations. Polycell Stain Stop dries to a white finish that can be decorated if required.
Application Description
HOW TO USE : 1) Apply generously by brush or roller to stained areas. 2) Allow to dry for 12 hours before decorating. 3) A second coat may be required for especially stubborn stains, which may be applied once the first coat is fully dry. 4) Remove any accidental spillage with Polycell Brush Cleaner before it dries. 5) Prime treated areas with a water-based paint if you are overcoating with a solvent-based paint. 6) Treated surfaces are now ready to decorate.
Technical & Safety Documentation
Tips & Advice
-
1. Preparing the SurfacesBEFORE USE : Cover furniture and carpets. Make sure the surface is clean, dry and free from loose particles and mould. Remove any wallpaper or loose paint. Fill holes or cracks with an appropriate Polycell Polyfilla and sand down well.
-
2. CleaningAFTER USE - Remove excess product from tools before cleaning with Polycell Brush Cleaner
-
3. StoringDo not use or store in extremes of temperature and protect from frost
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.