Polycell Maximum Strength Paint Stripper
Preparation for gloss paintwork
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Works from 20 minutes
-
Works on solvent and water based paints and varnishes
-
Use indoors and outdoors
-
For use on wood and metal
-
Coverage 0.5L should cover up to 0.8m2
-
Drying Time NA
-
Recoatable NA
-
Superstrong
-
Easy use
Product Description
Polycell Maximum Strength Paint Stripper is a quick and easy way to strip most types of paint and varnish without harming the surface. It penetrates the paint layers and lifts them up* to form a soft film that is easy to remove leaving the surface ready for painting. *This effect is visible only on solvent-based paint or varnish.
Application Description
HOW TO USE : 1) Apply by brush or a flat bladed tool, ensuring a generous and even coverage. 2) Leave until coating begins to blister or soften. Test scrape an area to see if adequate penetration has taken place. If required, the product can be left for up to 4 hours to maximise penetration through all of the coating layers. 3) Remove with a stripping knife or shave hook. 4) Should any coating remain, repeat the process. 5) Collect waste and dispose of safely.
Technical & Safety Documentation
Tips & Advice
-
1. Preparing the SurfacesBEFORE YOU START : Do not use in very cold or hot conditions (below 10°C or above 25°C) or in direct sunlight. Protect all furniture, floor coverings and surrounding areas. Keep the container away from face when removing lid. Prepare the area to be stripped by sanding or lightly scoring the surface. Not suitable for fibreglass or plastics.
-
2. CleaningFINISHING OFF - Use water to clean surface or white spirit to avoid raisning the grain of wood. Remove excess product from the tools before washing with soapy water
-
3. StoringReplace lid and store away from extremes of temperature.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.