Polycell Flexible Gap Polyfilla Cartridge
For gaps along skirting,door and window frames
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Use indoors or outdoors for linear gaps around doors, window frames & skirting boards
-
Flexes with movement
-
Crack resistant
-
Drying Time 24 hours
-
Recoatable 24 hours
-
Flexible
-
Easy use
Product Description
Polycell Flexible Gap Polyfilla achieves a white flexible crack-free fill between two surfaces where movement can occur. Allows controlled application direct from a sleleton gun making it perfect for long linear gaps.
Application Description
HOW TO USE : 1) Place the cartridge into the skeleton gun and seat the plunger by pressing the trigger. 2) Squeeze the trigger to force out the filler and move the gun along the repair. 3) The filler may be smoothed with a wet rounded spatula or dowel. 4) Wipe off any excess filler before it dries. 5) Can be over painted when fully dry (at least 24 hours).Painting over with low grade emulsion paints can cause cracks in the film.
Technical & Safety Documentation
Tips & Advice
-
1. Preparing the SurfacesBEFORE USE : Ensure surface and gaps are dry and free of loose material. Remove the tip of the cartridge carefully with a sharp knife and screw nozzle on.Remove the cap and carefully cut top from nozzle with a sharp knife to the bead size required
-
2. CleaningAFTER USE - Replace cap and remove excess filler from tools before cleaning in warm water.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.