Polycell Deep Gap Polyfilla
Ultra tough,sag resistant formulation to fill deep holes in one application
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Surface dry in 1 - 2 hours (depending on conditions)
-
Fills holes up to 20mm deep
-
Use indoors only for plaster, masonry, cement, stone & wood
-
Accepts nails & screws. Drillable
-
Drying Time Surface dry in 1 to 2 hours (depending on conditions)
-
Recoatable 2 hours
-
Big holes
-
Easy sand
Product Description
Polycell Deep Gap Polyfilla easily fills deeper holes up to 20mm in one application and can be sanded to a smooth finish. It will not shrink or crack and will accept nails and screws.
Application Description
HOW TO USE : 1) Stir to a creamy consistency. 2) Press the filler into hole with a filling knife, smoothing off with knife. Do not overfill and ensure filler is level with the surface being filled. 3) For deeper repairs above 20mm - build up in layers allowing to dry between applications. 4) If necessary, sand down when fully dry.
Technical & Safety Documentation
Tips & Advice
-
1. Preparing the SurfacesBEFORE USE : Ensure surface and holes are dry and free of loose material. Touch in nails and screw heads with a suitable metal primer. When working close to electrics ensure supply is isolated.
-
2. CleaningAFTER USE - To help prevent product drying out when storing, replace membrane and lid.
-
3. StoringDo not store in extremes of temperature and protect from frost
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.