How to use Polycell 3 in 1 Problem Wall Primer

  • Difficulty level one stars difficultylevel
Print

Step by step

  • Difficulty levelone stars difficultylevel
Ensure surface is clean, dry and free from loose particles, wallpaper and mould. If a mould is present treat with Polycell Mould Killer. Allow fresh plaster to dry for 7-10 days before treating.
1
Chalking distemper paints should be thoroughly removed before use.
2
Apply 1 coat of Polycell Problem Wall Treatment using a roller.
3
Once dry, the surface can be finished with all types of decorative paints.
4
After use, remove as much product from the roller as possible and wash with warm water.
5

Questions?

Call us0333 222 7171
(on working days between 08:15 and 16:45)

Find your nearest Polycell stockist:

You can find Polycell products in many supermarkets, major DIY stores and smaller independent stores throughout the UK. The range they stock may vary, so it's a good idea to check product availability with them in advance to avoid disappointment.

Contact Polycell UK
Phone:
0333 222 7171
Mon/Fri:
9.00 - 17.00