| Product Information |  |
 |
| Home | Product Selector |
Wood Flex Polyfilla
|
Polycell Wood Flex Polyfilla has been especially developed for wood. It is flexible, stainable, water-resistant and bonds strongly for all your wood filling tasks. It is ideal for filling cracks and holes in wood. Available in the following sizes: |
|
HOW TO USE
Ensure surfaces are clean, dry and structurally sound, cut away any soft or rotting wood. Where there is substantial decay, use Wood Hardener before applying the filler.
Stir contents until creamy / Work tube between fingers before opening.
Press Polycell Wood Flex Polyfilla well into the repair and smooth off with a knife.
Deep holes should be built up in layers of 1cm (3/8") allowing each to dry. Thin layers will dry in about 2 hours. Thicker layers should be left overnight before sanding. Protect from rain and temperatures below 5 degrees until dry.
DO NOT USE IN PERMANENTLY WET AREAS
Replace membrane and lid immediately after use.
Can be covered with oil paint, woodstain or varnish when dry. IF INTENDING TO STAIN ENSURE A SMALL AREA IS TESTED FIRST SO THAT A CLOSE COLOUR MATCH CAN BE ACHIEVED.
Tools required
Filling knife.
Storage
Store Away From Frost.
Cautions
Please read instructions.
NEED SOME HELP?Call us on the Polycell advice line. Our trained advisors will be pleased to answer your questions. Tel: 0870 444 11 11 |
|
