| Product Information |  |
 |
| Home | Product Selector |
Stain Stop Aerosol
|
Polycell Stain Stop is a highly pigmented paint which permanently prevents existing stains reappearing through paint. It provides one coat coverage over water stains, grease, nicotine, crayons, rust and soot. Available in the following sizes: |
|
HOW TO USE
Ensure surface is clean, dry and free from loose material.
When applying it is advisable to wear eye protection.
When stopping stains caused by water or damp, make sure that the original cause of the problem has been rectified.
Shake well until you hear the steel pellet rattling and then continue for 1 minute more.
Spray evenly over stain from a distance of 20-30 cm (9"-12") until stain is fully covered.
Allow at least 10 minutes to dry before painting or wallpapering.
For especially stubborn stains, allow Polycell Stain Stop to dry fully, then apply a second coat.
If over painting with gloss or eggshell paint, first prime treated areas with water based paint.
After use, invert the can and spray until nozzle is cleared to prevent clogging.
Tools required
Masking tape and safety glasses.
Storage
Store safely.
Cautions
Pressurised container: Protect from sunlight and do not expose to temperatures exceeding 50 degrees.. Do not pierce or burn even after use. Do not breath spray / vapour. Use only in a well ventilated area.
NEED SOME HELP?Call us on the Polycell advice line. Our trained advisors will be pleased to answer your questions. Tel: 0870 444 11 11 |
|
