Polycell Squeeze & Seal Kitchen And Bathroom

Task difficulty: Quite easy

Seals gaps around baths, sinks and worktops. Also suitable for areas where water contact may occur. Suitable for wood plaster, brick, ceramics, glass, acrylic, PVCu, and anodised aluminium.

Good control - no gun required.
Over-paintable and available in white and translucent.
Suitable for wood plaster, brick, ceramics, glass, acrylic, PVCU, and anodised aluminium.

How to use

BEFORE USE; Ensure surfaces are clean and free from loose material or mould. Remove old sealant residue completely before applying the new sealant - use Polycell Sealant Remover if necessary.
Work tube well between fingers.
Carefully cut nozzle to the required bead width (max 6mm) using a sharp knife. Cut the tube seal and attach nozzle.
HOW TO USE; Squeeze tube between fingers and palm of hand, and apply sealant directly into the gap as a continuous, single bead.
Smooth lightly with a wet round ended tool, angling the bead to shed water.
Remove excess sealant with a damp cloth before it dries.
After use, fit cap to the end of the nozzle to prevent product drying out.
Wash tools with warm water.

Further information

Tools required: Round ended tool, damp cloth.
Storage: Store product away from frost.
Available in the following sizes: 300ml tube
Cautions: Not suitable for areas where periods of continuous immersion may occur.