Polycell SmoothOver Your Textured Walls

Task difficulty: Quite easy

A quick and easy way to transform old-fashioned textured walls to a perfectly smooth surface that's ready to paint.

A quick and easy way to transform walls to a perfectly smooth surface, ready for painting.
Covers all common types of wall textures in just one application.
You don't have to be an expert - If you need to, you can sand when dry to remove any tramlines.

How to use

Make sure surfaces are clean and sound and remove any loose particles or mould. Seal stains with Polycell One Coat Stain Stop.
Touch in any nail heads or screws with gloss paint to prevent corrosion and fill any holes or cracks greater than 2mm with an appropriate Polycell Polyfilla.
You'll find it easier to smooth heavy textures if you scrape off the highest peaks first.
Start by stirring the Polycell SmoothOver to a creamy consistency. Then load the Polycell SmartSmoother with product. It's best to work with approximately 2cm depth across the full width of the blade.
Apply the Polycell SmoothOver to the wall, working away from the edges and focusing on a small area at a time. Test a small area first.
Reload the SmartSmoother as needed to ensure sufficient product is applied to cover the highest texture peaks.
Don't worry about small irregularities or tramlines as these can be removed by light sanding when the product is dry. Apply a second coat if required.
Wash tools in warm soapy water. Your walls are now ready to paint

Tools required: Polycell SmartSmoother tool.
Storage: Do not use or store in extremes of temperature and protect from frost.
Available in the following sizes: 5L and 7L tubs
Cautions: Please read instructions