Product Information
Home | Product Selector

SmoothOver Your Textured Walls

A quick and easy way to transform old-fashioned textured walls to a perfectly smooth surface that's ready to paint. Available in the following sizes: 5 litres

For A Perfectly Smooth Wall That's Ready to Paint

HOW TO USE

Make sure surfaces are clean and sound and remove any loose particles or mould. Seal stains with Polycell Stain Stop.


Touch in any nail heads or screws with gloss paint to prevent corrosion and fill any holes or cracks greater than 2mm with an appropriate Polycell Polyfilla.


You'll find it easier to smooth heavy textures if you scrape off the highest peaks first.


Start by stirring the Polycell SmoothOver to a creamy consistency. Then load the Polycell SmartSmoother with product. It's best to work with approximately 2cm depth across the full width of the blade.


Apply the Polycell SmoothOver to the wall, working away from the edges and focusing on a small area at a time. Test a small area first.


Reload the SmartSmoother as needed to ensure sufficient product is applied to cover the highest texture peaks.


Don't worry about small irregularities or tramlines as these can be removed by light sanding when the product is dry. Apply a second coat if required.


Wash tools in warm soapy water. Your walls are now ready to paint.

Coverage

5 litres will cover up to 10m² on a 1mm deep textured surface (average layer thickness 0.5mm)

Tools required

Polycell SmartSmoother tool

Storage

Do not use or store in extremes of temperature and protect from frost.

Cautions

Please read instructions

Demo video

See how easy it is to use our range of SmoothOver products with the Polycell SmoothOver video.

NEED SOME HELP? Call us on the Polycell advice line. Our trained advisors will be pleased to answer your questions. Tel: 0870 444 11 11

Moisten porous surfaces to extend working time of product.