How to use

1. Ensure surfaces are clean and free from surface water, mould and loose particles. Remove old Sealant residue completely before applying new sealant - use Polycell Sealant Remover if necessary.
2. Remove the cap and cut nozzle to required width with a sharp knife. If sealing around a bath, to maximise the gap, fill bath with water until the product dries.
3. Remove tamper proof tab from nozzle. Fully unscrew nozzle anti-clockwise to release trigger.
4. Press trigger to release sealant and draw nozzle along in one continuous bead. Rate of sealant flow can be adjusted by adjusting the nozzle.
5. Within 10 minutes of application, smooth using a spatula or similar round ended tool wetted with soapy water, angling the bead to shed water. Remove excess sealant with white spirit before it dries.
6. When finished, screw down nozzle & lower trigger. Replace cap to reduce curing in the nozzle. Clean tools with white spirit.
7. Leave to cure for 24 hours.

Further information

Tools required

Round ended tool and damp cloth.

Storage

Do not use or store in extremes of temperature and protect from frost.

Available in the following sizes

200ml pressure pack

Cautions

Please read instructions

Polycell Sealant Plus Kitchen and Bathroom Pressure Pack application method:

• Dries in 24 hours (depending on conditions)
• Use indoors
• Seals around baths, shower trays, sinks, toilets and worktops, window frames and skirting boards. Suitable for worktops, ceramics, wood, PVCu and acrylic

Related to this product

• 

  Polycell Sealant Remover

  Removes sealants without surface damage

  Find out more Polycell Sealant Remover