Polycell Sealant Cartridge Interior

Task difficulty: A bit of skill required

Polycell sealant will provide a seamless seal between two surfaces where movement can occur, and because it is acrylic it can be overpainted.

How to use

Ensure surface and gap are dry and free from loose material.
Remove the tip of the cartridge carefully with a sharp knife, and screw nozzle on. Remove cap and carefully cut top from the nozzle with a sharp knife, to the size of bead you require.
Place the cartridge into a sealant gun (not supplied) and seat the plunger by pressing the trigger.
Squeeze the trigger to apply the sealant into the gap as a continuous bead.
Smooth lightly with a wet round ended tool.
Remove excess sealant with a damp cloth before it dries.
Protect from water until fully dried (at least 24 hours
Can be over painted when dry.
Replace cap and wash tools in warm water.

Tools required: Skeleton gun.
Storage: Do not use or store in extremes of temperature and protect from frost.
Available in the following sizes: 290ml cartridge
Cautions: Please read instructions. For an overpaintable sealant please use Polycell Sealant Plus or Squeeze & Seal