| Product Information |  |
 |
| Home | Product Selector |
Sealant Cartridge Interior
|
Polycell sealant will provide a seamless seal between two surfaces where movement can occur, and because it is acrylic it can be overpainted. Available in the following sizes: |
|
HOW TO USE
Ensure surface and gap are dry and free from loose material.
Remove the tip of the cartridge carefully with a sharp knife, and screw nozzle on. Remove cap and carefully cut top from the nozzle with a sharp knife, to the size of bead you require.
Place the cartridge into a sealant gun (not supplied) and seat the plunger by pressing the trigger.
Squeeze the trigger to apply the sealant into the gap as a continuous bead.
Smooth lightly with a wet round ended tool.
Remove excess sealant with a damp cloth before it dries.
Protect from water until fully dried (at least 24 hours).
Can be over painted when dry.
Replace cap and wash tools in warm water.
Coverage
Not applicable.
Tools required
Skeleton Gun.
Storage
Do not use or store in extremes of temperature and protect from frost.
Cautions
Please read instructions.
NEED SOME HELP?Call us on the Polycell advice line. Our trained advisors will be pleased to answer your questions. Tel: 0870 444 11 11 |
|
