| Product Information |  |
 |
| Home | Product Selector |
Sealant Cartridge Exterior
|
Polycell sealant will achieve a seamless waterproof seal between two surfaces where movement can occur. Available in the following sizes: |
|
HOW TO USE
Ensure surfaces are clean, dry and free from loose material or mould. Remove old sealant residue completely before applying new sealant - use Polycell Sealant Remover if necessary.
Remove the tip of the cartridge carefully with a sharp knife, and screw nozzle on. Remove cap and carefully cut top from the nozzle with a sharp knife, to the size of bead you require.
Place the cartridge into a sealant gun (not supplied) and seal the plunger by pressing the trigger.
Squeeze the trigger to apply the sealant into the gap as a continuous bead.
Within 5 minutes of application, smooth using a spatula or stick wetted with soapy water, angling the bead to shed water.
Leave silicone products to dry for at least 6 hours.
Immediately after use, remove as much sealant as possible from tools using a dry paper towel, as dried sealant can only be removed by cutting with a sharp knife. Replace cap after use.
Tools required
Skeleton Gun
Storage
Do not use or store in extremes of temperature and protect from frost.
Cautions
Please read instructions.
NEED SOME HELP?Call us on the Polycell advice line. Our trained advisors will be pleased to answer your questions. Tel: 0870 444 11 11 |
|
