| Product Information |  |
 |
| Home | Product Selector |
Plaster Repair Polyfilla - Powder
|
Polycell Plaster Repair Polyfilla is a specially formulated easy mix powder which is much easier to apply and smooth out than ordinary plaster. It gives a smooth white finish to all masonry surfaces and will not slump, shrink or crack. Available in the following sizes: |
|
HOW TO USE
Ensure surface is dry and free from loose material. Rub down gloss surfaces.
Touch in nails and screw heads with oil based paint and ensure all wiring in insulated.
Add approximately 2-2.5 parts Polyfilla Plaster Repair Easy Mix Powder to 1 part water and mix to a smooth consistency.
Wet the repair area thoroughly to promote good adhesion.
Apply with a filling knife, trowel or float with upward sweeping strokes. Maintain a firm, even pressure.
Do not fill more than 50mm in one application.
Gently smooth off with a clean, wet float, cleaning and wetting as required.
Once the surface is firm but before it dries hard, re-wet and polish with a clean float for a smooth finish.
Allow to dry for at least 24 hours (several days for deeper repairs).
Store any unused powder in dry conditions.
Wash hands after use and wash tools in warm water.
Tools required
Float, mixing vessel.
Storage
Store Away From Frost.
Cautions
Please read instructions.
NEED SOME HELP?Call us on the Polycell advice line. Our trained advisors will be pleased to answer your questions. Tel: 0870 444 11 11 |
|
