Achieves a white crack-free fill between two surfaces where movement can occur. Controlled application is ideal for long linear gaps.
- For flexible, crack-free filling between two surfaces where movement can occur.
- Easily controlled application for long linear gaps.
- For indoor and outdoor use.
How to use
- Ensure surface and crack are dry and free from loose material
- Remove the tip of the cartridge carefully with a sharp knife, and screw nozzle on.
- Remove cap and carefully cut top from nozzle with a sharp knife to the size of hole you require.
- Place cartridge into a skeleton gun and seat the plunger by pressing the trigger.
- Squeeze the trigger to force out the filler and move the gun along the repair.
- The filler may be smoothed with a wet rounded spatula or dowl.
- Wipe off excess before it dries.
- Can be over painted when dry.
- Replace cap and wash tools in warm water.
- For best results the area to be filled should be no more than 20mm wide by 12mm deep.
Further information
- Tools required
- Dowl, rounded spatula.
- Storage
- Store away from frost.
- Available in the following sizes
- 290ml cartridge and 330g tube
- Cautions
- Please read instructions.
Polycell Flexible Gap Polyfilla application method:
- Dry in 24 hours+
- For gaps around door and window frames & skirting boards
- Use indoors or outdoors
Related to this product
Polycell Fine Surface Polyfilla
For a glass smooth finish
Related to this product
…using Polycell Flexible Gap Polyfilla
