| Product Information |  |
 |
| Home | Product Selector |
Flexible Gap Polyfilla
|
Achieves a white crack-free fill between two surfaces where movement can occur. Controlled application is ideal for long linear gaps. Available in the following sizes: |
|
HOW TO USE
Ensure surface and crack are dry and free from loose material
Remove the tip of the cartridge carefully with a sharp knife, and screw nozzle on.
Remove cap and carefully cut top from nozzle with a sharp knife to the size of hole you require.
Place cartridge into a skeleton gun and seat the plunger by pressing the trigger.
Squeeze the trigger to force out the filler and move the gun along the repair.
The filler may be smoothed with a wet rounded spatula or dowl.
Wipe off excess before it dries.
Can be over painted when dry.
Replace cap and wash tools in warm water.
For best results the area to be filled should be no more than 20mm wide by 12mm deep.
Tools required
Dowl, rounded spatula.
Storage
Store Away From Frost
Cautions
Please read instructions.
NEED SOME HELP?Call us on the Polycell advice line. Our trained advisors will be pleased to answer your questions. Tel: 0870 444 11 11 |
|
