| Product Information |  |
 |
| Home | Product Selector |
Damp Seal Aerosol
|
Polycell Damp Seal has been specially formulated to seal patches of penetrating damp on interior walls and ceilings in just one coat, preventing them from showing through and spoiling decorations. Damp Seal has a matt white finish that can be over painted or wallpapered if required. Available in the following sizes: |
|
HOW TO USE
Thoroughly clean and repair the surface.
Remove any wallpaper or loose paint. If mould is present, use Polycell 3 in 1 Mould Killer. Allow new plaster to dry for 7-10 days before using this product.
Mask surrounding areas to protect from overspray.
Shake well until you hear the steel pellet rattling and then continue for 1 minute more.
Spray evenly over damp patch from a distance of 20-30cm (9"-12") until patch is covered. Shake can occasionally during use.
Allow at least 2 hours to dry before painting or wallpapering. For heavier damp patches apply a second coat for best results.
After use, invert the can and spray until nozzle is cleared to prevent clogging.
Note - Polycell Damp Seal is not a cure for damp, which should always be treated at source before applying Damp Seal. Polycell Damp Seal is not suitable for use against rising damp. It should not be used at ground level, where efflorescent salts are present, or where condensation is a problem.
Tools required
Brush, Masking Tape, Safety Glasses
Storage
Do not use or store in extremes of temperature and protect from frost.
Cautions
Please read instructions
NEED SOME HELP?Call us on the Polycell advice line. Our trained advisors will be pleased to answer your questions. Tel: 0870 444 11 11 |
|
